Filter
Top Products
6 - WPT PAGES
134
190-00357-00 Rev E
Airport Departures
To manually transition to a loaded arrival proce-
dure:
1. From the Active Flight Plan Page, press the
small right knob to activate the cursor and
scroll down through the list of loaded arrival
waypoints.
2. When the desired loaded arrival waypoint is
highlighted, press the direct-to key, then
press ENT to highlight the 'Activate?' prompt
(note that any loaded arrival waypoint may be
selected).
3. Press ENT again to confirm activation.
Airport Departure Page
TheAirportDeparturePageshowstheavailable
AirportDepartureProcedures(DPs; also referred to as
SIDs) for the selected airport. Where multiple runways
or transitions are associated with the departure pro-
cedure, that information may also be displayed. A map
image provides a layout diagram for each departure,
runway and transition.
Identifier, Symbol
and Type
Map Image
Departure
Procedure Name
Sixth Page in
WPT Group
Runways Associated
with Departure
Transitions
To scroll through the available departures:
1. Press the small right knob to activate the
cursor.
2. Turn the large right knob to place the cursor
on the departure (DEP) procedure name field.
With the cursor on the “DEP” field, turn the
small right knob to display a list of available
departure procedures.