Filter
Top Products
6 - WPT PAGES
129
190-00357-00 Rev E
Airport Approaches
Airport Approach Page
The Airport Approach Page shows the available
approach procedures for the selected airport. Where
multiple initial approach fixes (IAFs) and feeder routes
are available, that information may also be displayed.
A map image provides a layout diagram for each
approach and transition.
If a WAAS approach has been selected, the WAAS
approachIDisdisplayedinthetopleftcornerofthe
map. The approach service level is shown in the lower
right corner of the map. Service level annunciations
availableare:LP,LPV,L/VNAV,LNAV+V,orLNAV.
Identifier, Symbol
and Type
Map Image
Approach
Procedure Name
Fourth Page in
WPT Group
Transitions: IAFs,
Feeder Routes and
Vectors-to-Final
WAAS
approach
ID
WAAS service level
To scroll through the available approaches and
transitions:
1. Press the small right knob to activate the
cursor.
2. Turn the large right knob to place the cursor
on the APPROACH procedure name field.
3. Turn the small right knob to display a window
of available approaches for the selected airport.
Continue turning the small right knob to
select the desired approach.
With the cursor on the
“APPROACH” name field, turn the small right
knob to select the desired procedure and
press ENT.
4. Press ENT. The cursor moves to the transitions
(TRANS) field.
5. Turn the small right knob to display a window
of available transitions. Continue turning
the small right knob to select the desired
transition or select “VECTORS” for guidance
only along the final course segment of the
approach.
With the cursor on the “TRANS” field, turn
the small right knob to select the desired
transition. Select “VECTORS” for guidance
only along the final course segment of the
approach.
6. Press ENT. To remove the flashing cursor, press
the small right knob.