Filter
Top Products
MAINTENANCE
2.20
Antifreeze Hydrometer
S A 50/50 or 60/40 mixture of antifreeze
and distilled water will provide the
optimum cooling, corrosion protection,
and antifreeze protection.
S Do not use tap water, straight antifreeze,
or straight waterin the system. Tap water
contains minerals and impurities which
build up in the system.
S Straight water or antifreeze may cause
the system to freeze, corrode, or
overheat.
Polaris 60/40 Anti-Freeze / Coolant
(PN 2871323)
COOLING SYSTEM HOSES
1. Inspect all hoses for cracks, deterioration,
abrasion or leaks. Replace if necessary.
2. Check tightness of all hose clamps.
CAUTION:
Do not over-tighten hose clamps at radiator, or
radiator fitting may distort, causing a restriction to
coolant flow. Radiator hose clamp torque is 36 in. lbs.
(4 Nm).
RADIATOR/GRILL SCREEN
B
A
1. Check radiator (A) air passages for restrictions or
damage. Check and clean the radiator screen
(B).
2. Carefully straighten any bent radiator fins.
3. Remove any obstructions with compressed air or
low pressure water.
COOLING SYSTEM
PRESSURE
TEST
Refer to Page 3.6 for pressure test procedure.
COOLANT LEVEL
INSPECTION
The recovery bottle, located on the left side of the
machine, mustbemaintainedbetweentheminimum
andmaximumlevelsindicatedontherecoverybottle.
Recovery Bottle
Accessible Under Side Panel
With the engine at operating temperature, the coolant
level should be between the upper and lower marks
on the coolant reservoir. If not: