Filter
Top Products
FUEL SYSTEM/CARBURETION
4.5
FUEL SYSTEM COMPONENT OVERVIEW
Tank to Pump Line
Impulse Line
Pump to Carburetor Line
Fuel Filter
Carburetor
Vent Line
Fuel Tank
Fuel Pump
FUEL SENDER
REMOVAL/INST
ALL
Fuel Sender Removal
1. Disconnect the negative battery cable.
2. Remove the side panels and front cab assembly.
Refer to “COVER PANEL REMOVAL” in Chapter
5 for details.
3. Remove the gas tank cover vent hose. Be sure to
properly route the vent hose upon reassembly.
Pic 1
4. Remove the clamps on the PVT intake duct and
remove the PVT duct.
5. With all the body panels removed from the front of
the ATV and the gas tank exposed, disconnect
the fuel sender wiring harness.
6. Remove the 5 screws that secure the fuel sender
to the tank.