TRANSMISSION
8.18
17. Install the oil deflector shield into the gearcase.
Apply Loctitet 262 (PN 2871952) to the threads
of the screws. Torque the screws to 16--30 in.lbs.
(2--3.3 Nm).
16--30 in.lbs.
18. Install the 59T rear drive sprocket and drive chain.
19. Tensioner Installation:
S Place the tensioner cam on the front
spacer and tensioner shoe on the rear
spacer.
S Insert the pins through the cam and
through the shoe.
S Place the spring over the front pin and
hook the spring leg under the cam.
S Lift the leg of the spring up and over the
rear pin. The tensioner cam will lift the
shoe and tension chain.
Tensioner Assembly - Top View
Lock Cam
Tensioner
Spring Leg
Forward
View From Left Side of Transmission
Hook Spring Leg Under Cam
Forward
Lift Spring Over Rear
Mounting Pin