Filter
Top Products
BODY / STEERING / SUSPENSION
5.3
2. Next, use the diagonal side cutters under outside
insert (B) to completely remove the assembly.
NOTE: The inside insert (A) will still be installed in
the outside insert (B
B
3. To install the inserts, press outside insert (B) into
the hole. Press inside insert (A) until it snaps into
place.
NOTE: The outside insert (B) should be flush
surface after installation.
The inside insert (A) should be flush with the top of
the outside insert (B).
A
B
SIDE PANEL REMOVAL
Side panel removal is quick and easy, use the
following instructions for removal and installation.
1. Remove seat by releasing the latch and lifting up
on the seat.
Step 1.
2. Grasp the rear of the side panel nearthe rear cab.
With a firm motion, pull the panel outward to
disengage the side panel from the grommet. Pull
the panel downward and rearward to remove it
from the ATV.
Step 2.
3. Reinstall the side panel by reversing the removal
procedure.
Step 3.