Filter
Top Products
Reference Manual
00809-0100-4832, Rev AA
March 2004
Rosemount 3095FC
www.rosemount.com
Appendix C Rosemount User
Interface Software
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page C-1
Point Type Parameter Definitions . . . . . . . . . . . . . . . . . . . page C-1
OVERVIEW To configure the 3095FC, you must be familiar with the structure of the
database. The database is broken into individual parameters and each
database parameter is uniquesly associated by Parameter Number and Point
Type.
POINT TYPE
PARAMETER
DEFINITIONS
A list of all Point Types is provided in Table 3 1 on page 3-1. For each of the
configurable point types (0 through 59), a parameter table is given in Table 3 5
through Table 3 48. Note that the parameter tables each have a point type
name and five columns:
Parameter # - Identifies the specific parameter associated with the Point
Type.
Read-Write - Indicates if the parameter can be read and written to (R/W)
or if the parameter is read-only (R/O).
Data Type - Table C-1 defines the Data Types found in the parameters
table.
Table C-1. Data Types
Length - The byte length of the parameter is indicated in this column.
Description - A brief description of each parameter is provided in this
column.
Data Type Definition Byte Length
AC ASCII character (groups of 10, 20, or 30 characters) 1 per character
BIN Binary 1
FLP Floating Point - IEEE Format 4
INT 8, 16, 32 Signed Integer - number of bits follows 1, 2, or 4
N/A Not applicable –
TLP Point Type, Logical or Point Number, and Parameter
Number
3
UINT 8, 16, 32 Unsigned Integer - number of bits follows 1, 2, or 4