Honeywell AV8OR GPS Receiver User Manual


 
AV8OR User’s Guide Aviation Mode Operation
VFR Moving Map Function
Pub. No D200803000008 Page 3-10 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
North Pointer (3): In the upper left corner of the Map display is a
North pointer. The pointer has a triangle shape
. The north
pointer always points north to help orient the map view. Double
tapping on the north pointer toggles the map orientation between
North Up and the Track Up mode.
Map Page (4): The map page is the main page for Go Fly
aviation mode. The map page shows the aircraft position on the
map.
Aircraft Symbol (5): A Fixed wing
or Rotary wing
aircraft symbol is displayed in the center of the screen that
represents the actual position of the aircraft. The symbol is
changed in the System Setup – General System Setup page.
Menu Soft keys (6): The menu soft keys are displayed on the
right side of the screen. They allow the user to navigate through
the menu directory. The soft keys are shown initially when the
Map page is first displayed. After a configurable period of time,
the soft keys are removed from the Map page. Tapping on the
Map page causes the menu soft keys to display again. The MAIN
MENU soft key returns to the Aviation Main Menu page.
Title Bar (7): The title bar shows the currently selected map view
across the bottom of the Map page.
The ZOOM OUT (8)
icon increases the displayed range of
the map.
Map Range (9): The current range (labeled RNG
) is
displayed in the range tag window in the lower left corner of the
display. The range distance unit (nautical miles, statute miles or
kilometers) is configured in the System Setup-GENERAL
SYSTEM SETUP page. Range is measured on the map as the
distance from the center of the aircraft symbol to the outer ring
around the aircraft. The inner ring is at one-half the displayed
range value. These rings are turned on or off in System Setup-
MAP SETUP page.
Status window (10): When there is a new aircraft status, a
flashing icon is displayed in the status window in the left bottom