Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-42 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Enter an Address without knowing the district/suburb
Long road
s can run across several districts or suburbs. You may not
know if a particular house number is in which of them. In this case,
follow the instructions below:
The procedure is explained starting from the Navigation menu.
1. Tap the following soft Keys:
(Simple mode), or
, (Advanced mode).
2. By default, Go Drive proposes the country/state and settlement
where you are. If needed, tap the soft Key with the name of the
country/state, and select a different one from the list.
3. If needed, change the settlement:
• To select the settlement from the list of recently used ones,
tap the
soft Key.
• To enter a new settlement:
1. Tap the soft Key with the name of the settlement, or if
you have changed the country/state, tap
.
2. Start entering the settlement name on the keyboard.
3. Get to the list of search results:
o After entering a couple of characters, the names that
match the string appear in a list.
o Tap
to open the list of
results before it appears automatically.
4. Pick the settlement from the list.
4. Enter the street name: