Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
Basic Operation
Pub. No D200803000008 Page 3-2 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
If the initial self-test fails, the unit is unable to continue operating
safely. A red
is displayed in place of the check mark and the first
soft key changes to HELP, as shown in Figure 3-2.
Figure 3-2: Self Test Failed
When the HELP soft key is tapped, a caution message is displayed
as in Figure 3-3.
Figure 3-3: Self Test Failed Caution
The unit should be turned off and then turned back on. If AV8OR still
fails the self-test, please contact customer support.
If the self-test finishes successfully, the self-test window header
changes to SELF TEST COMPLETED in green, as shown in Figure
3-4.