Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
Messages Function
Pub. No D200803000008 Page 3-70 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
The checklists can only be created, edited and deleted on a PC and
then transferred to the SD card. In order to create a valid checklist
and allow the software to find the checklists the following rules must
be followed:
• The Checklists must be stored in the \GoFly\data\user\Notepads
directory on the SD card.
• Checklists must be text files.
• The filename must have the .txt extension. (Example is
“emergency.txt”)
• The file size must be less than 16,384 bytes.
• A text file with the name “route.txt” is an invalid notepad filename
and is not recognized. The filename “route.txt” is used to load
flight plan and WPT data.
• The name assigned to the file will be the name displayed on the
checklist page. Therefore, the name should be representative of
the function the checklist is performing. An example is “Engine
Start”.
• Checklists must be created using the following rules:
• Each checklist item should start with [] square brackets to create
an easy to read checklist.
• The [] brackets are interpreted as a check box indication and can
appear anywhere.
• Each checklist item must end with a carriage return.
• The number of characters on each line should be limited to 50 or
fewer characters. If more than 50 characters are on a line, then
the text will wrap to the next line.
• Everything is displayed as typed.
An example checklist is shown below:
[] Entry 1
[] Entry 2
[] Entry 3
[] Entry 4
[] Entry 5
[] Entry 6