Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-79 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-103: System Setup – Navigation Setup
Tap the SAVE & EXIT soft key to save any changes. Tap the
RESET VALUES soft key to restore most of the values to their
factory initial settings.
Double tap on an option or tap once on an option to highlight it and
then tap on the EDIT soft key to display a pop up window to show
the possible values that can be set. Double tap the highlighted value
or highlight the value and tap on the SELECT soft key to change the
item’s values.
• AutoNav: Enable the AutoNav function to allow AV8OR to
automatically switch between the external and internal GPS
sources when there is more than one source. The AutoNav
option only shows on the Navigation Setup Page when both the
Navigation Source and Position in the Device Setup Page are
set to External.
• CDI Scale: Sets the full scale deflection of any displayed Course
Deviation Indicator (CDI) to: 0.6, 2 or 10 kilometers, 0.3, 1, or 5
nautical miles or 0.4, 1 or 5 statute miles. Values are based on
the distance units, configured in the General System Setup
Options table distance units field. The CDI is configured on the
Data Field Setup Page in System Setup.
• Time Zone: The AV8OR has an on board clock that ensures the
Estimated Time of Arrival (ETA) information presented is
accurate. The time is stored in two summed parts as UTC
(Universal Coordinated Time or Greenwich Mean Time) and as a