Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-34 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
The camera can check the speed in any direction.
SPEED LIMIT WARNING
Maps sometimes contain information about the speed limits of the
road segments. This information may not be available for your region
(ask your local dealer) or may not be fully correct for all roads on the
map.
You can configure Go Drive to warn you if you exceed the current
limit. Tap the following soft Keys:
, , ,
.
When you exceed the speed limit, the following happens:
• Visible Warning: A symbol with the speed limit appears in
the corner of the map (for example:
).
• Audible Warning: A voice message is played using the
selected voice guidance profile.
ROUTE NAVIGATION
You can set up your route in Go Drive in several ways:
if you need a simple route (a route with only one destination, without
any intermediate via points), you can select the destination and start
navigating to it right away
you can plan a multi-point route (available in Advanced mode only)
you can also plan a route independently of your current GPS position
or even without GPS reception (available in Advanced mode only)
Selecting the Destination of a Route
Go Drive offers you several ways of choosing your destination and
via points (intermediate destinations):
• Use the selected location on the map.
• Enter a full address or a part of an address, for example a street
name without a house number or the names of two intersecting