Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-107 Revision July
2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Type Description
Permit
needed
You might need a permit or permission from the
owners to use certain roads or to enter certain areas.
Go Drive excludes these roads from the route
calculation by default.
Ferries Go Drive includes ferries in a planned route by
default. However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
Cross-
border
planning
In some cases the route calculated according to your
other navigation and route preferences would lead
through another country. If you wish to always stay
within the same country, turn this option off.
Carpool
lanes
This control appears only when navigating in the USA.
You should check whether you are allowed to use
carpool lanes before enabling this road type.
Route Calculation Method types:
Option Description
Fast Gives the quickest possible route if you can
travel at or near the speed limit on all roads.
Usually the best selection for fast and normal
cars.
Short Gives a route that has the smallest total distance
of all possible routes between the route points.
Usually practical for pedestrians, cyclists or slow
vehicles.
Economical
Combines the benefits of Fast and Short: Go
Drive calculates as if it were calculating the Fast
route, but it takes other roads to save petrol.
Easy
Results in a route with fewer turns. With this
option, you can make Go Drive to take, for
example, the motorway instead of series of
smaller roads or streets.