Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-104 Revision July
2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Soft Key Description
Master Volume Use the switch to mute all sounds of the
device and then to re-enable them again. The
position of the fader determines the volume
level. The loudness of Go Drive is
independent of your device settings. When
you exit the program, the device default
settings return.
Voice Guidance
Volume
The slider adjusts the loudness of voice
prompts. In its leftmost position, the voice
guidance is suppressed; in its rightmost
position, the master volume applies.
Key Sounds Key sounds are audible confirmation of either
pressing hardware soft Keys or tapping the
touch screen. The switch turns the key
sounds on or off. Key sounds are played at
the master volume level.
Dynamic Volume When driving at high speed, the noise in the
car may be too loud to clearly hear the voice
guidance and other sounds. Using Dynamic
Volume you can instruct Go Drive to
increase the volume when your speed
exceeds a certain minimum, and reach its
highest volume at the given maximum speed.
ROUTE PLANNING OPTIONS
These settings determine how routes will be calculated. Tap the
following soft Keys:
, , .
Soft Key Description