Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-85 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
.
The fields on this screen are continuously updated while you keep
the screen open. You can switch between the trips, pause then
resume them, or reset their data. You have the following functions on
this screen:
Name Description
Pauses the trip currently shown on the
screen. Values on the screen stop changing.
This soft Key replaces the previous one if it
has been activated. Tap it to resume
collecting trip data.
Resets all counters of the currently shown
trip. Collecting trip data is restarted only
when Go Drive receives a position from the
GPS.
,
Cycles through all trips.
QUICK MENU
The Quick menu is a selection of controls that are frequently needed
during navigation. It can be opened directly from the Map screen by
tapping
.