Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-72 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Symbol Name
Description
Current
GPS
position
Your current position displayed on
the map.
• In pedestrian mode it is the exact
GPS position.
• If a vehicle is selected for route
calculation, the arrow is put on the
nearest road.
Cursor
(selected
location)
map The location selected in the Find
menu, or a map point selected by
tapping the map.
Start point The first point of the route.
Normally, if GPS position is
available, it is the start point of the
route.
If there is no valid GPS position, Go
Drive uses the last known GPS
position as the start point.
When you are using a saved route,
Go Drive asks you if you want to
use your GPS position or the first
point in the saved route as the start
point.
You can also modify the start point
in the Cursor menu. If you do so,
the automatic off-route recalculation
needs to be turned off to keep the
selected point as the start point.
If the automatic off-route
recalculation is disabled for any of
the above, tapping the
icon in the Turn Preview field not
only initiates a route recalculation
from the current GPS position, but it
will re-enable the automatic off-
route recalculation as well.
Via point A via point is an intermediate
destination. You can place as many