Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-25 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Note
!
Even if you move the map while you are driving, Go Drive
continues navigating if there is an active route: it plays the
voice instructions and displays the turn preview icons
according to your current GPS position.
Selected Location (Cursor)
If you select a locatio
n in the Find menu, or you tap the map when
the map control soft Keys are visible, the Cursor appears at the
selected point on the map. Go Drive displays the Cursor with a
radiating red dot (
) to make it visible at all zoom levels, even
when it is in the background of a 3D map view.
When the Cursor is set, tap
. The Cursor menu appears and
you can use the Cursor as one of the following:
• The start point of a route
• A via point in a route
• The destination of a route
You can also search for POIs around the Cursor. Or you can save
the location of the Cursor as:
• A Favorite
• A Road Safety Camera
• A POI
• A map marker Pin
Original Position in the Cursor Menu
Whe
n the Cursor menu is open, a special icon (
) shows the
Cursor position the menu was opened with.
You can move and zoom the map, and you can set the Cursor to a
different place. The usual cursor (
) appears, and the soft Keys
of the Cursor menu initiate actions for this new location.
To return to the original Cursor position, tap
. The map jumps
back to the position with which the Cursor menu was opened, and
the
icon appears again.