Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-85 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Tap the RESET VALUES soft key to set all option to their factory
defaults.
Flight Plan Data Setup
Flight Plan Data Setup pa
ge allows the user to set up the headers
for the flight plan in the flight planning section.
Figure 3-106: System Setup – Flight Plan Data Setup
The ‘Flight Plan Data Column Setup’ table displays the current
column headings for the flight plan data display. The ‘Select Data
Column Type’ table defines the column headings that are available.
Tap on the ‘Flight Plan Data Column Setup’ table to highlight the
desired configurable column, the corresponding column type is
displayed with a white border box in the ‘Select Data Column Type’
table. Move the highlighted box to the desired new column heading
the heading in the above table changes as the lower table highlight
is moved.
Tap the RESET COLUMNS soft key to set the column heading to
their factory defaults.
Demo Mode Setup
The data in th
e Demo Mode Setup window Figure 3-107 is used to
control the st
arting position, altitude, speed and initial track of the
simulator.