Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-106 Revision July
2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Soft Key Description
Recalculate to
Avoid Traffic
This setting determines how Go Drive uses
the received TMC information in route
recalculation: • Automatic: When route
recalculation becomes necessary based on
the received TMC events, Go Drive
recalculates the route automatically. • Manual:
When route recalculation becomes necessary
based on the received TMC events, Go Drive
notifies you, but you can decide whether to
recalculate the route or not. • Disabled: TMC
events are only taken account when the route
is recalculated in an off-route situation.
Vehicle Types:
• Car
• Taxi
• Bus
• Emergency vehicles
• Bicycle
• Pedestrian
Road Types Used for Route Planning:
Type Description
Motorways You might need to avoid motorways when you are
driving a slow car or you are towing another vehicle.
Unpaved
roads
Go Drive excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually
you cannot reach the speed limit on them.
Toll roads By default Go Drive includes toll roads (pay roads
where there is a peruse charge) in the routes. If you
disable toll roads, Go Drive plans the best toll-free
route.
Charge
roads
Charge roads are pay roads where you can purchase
a pass or vignette to use the road for a longer period
of time. They can be enabled or disabled separately
from toll roads.