Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
System Setup Function
Pub. No D200803000008 Page 3-86 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Figure 3-107: System Setup – Demo Mode Setup
Scroll up and down between the options, and set the values.
• Ident: Use the Ident field to assign a name to the Initial Position
(manual entry). Highlight the Ident and enter the Ident input
entry, the virtual keyboard is displayed. Input the Ident name
characters. The system will search for similar Ident names in the
database based on the character being input, as shown
in Figure 3-108. As an example when the user inputs LOS ANG,
the system
will display similar Ident names such as LOS
ANGELES/VAN NUYS. This function is convenient for the user
by finishing the input of the full Ident name. The user can also
define a new name for the Ident.
Figure 3-108: System Setup – Demo Mode Setup Ident Settings