Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-4 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
GETTING STARTED
From the Main Menu (refer to Figure 4-1), tap the soft
key to start the Go Drive Automotive Navigation program.
Figure 4-1: AV8OR Main Menu
When Go Drive is started the first time, you need to do the following:
• Select the written language of the application. Later you can
change it in the Settings Menu section.
•
Select the language and speaker used for voice guidance
messages. Later you can change it in Settings Menu
se
ction.
• Select whether to start the program in “Simple” mode or in
“Advanced” mode. Later you can switch between the two
operating modes in Settings Menu section.
After this, the Navigation m
enu appears and you can start using Go
Drive. Figure 4-2 displays the Navigation menu in Simple mode.