Filter
Top Products
AV8OR User’s Guide Automotive Mode Operation
Pub. No D200803000008 Page 4-76 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Soft Key Description
If the Cursor is at or near one of the via
points, this soft Key replaces the previous
one, and deletes the selected via point
from the route. The route is recalculated
without the deleted point.
The Cursor is appended at the end of the
route as the new destination. The
previous destination is demoted, and
becomes the last via point.
This soft Key is similar to the soft Key, but
a new screen opens, and the route is
calculated with all the possible route
calculation methods (Fast, Short,
Economical and Easy). Observe the
results, and choose one of the routes to
navigate.
The Cursor becomes the start point of the
route. This means that the route will not
be started from the current GPS position,
and Automatic Off-route Recalculation
needs to be turned off to keep the start
point the selected one.
Soft Key Description
If the Cursor is at or near the selected start
point, this soft Key replaces the previous one,
and deletes the start point from the route. The
current GPS position is used again as the
start point, and Automatic Off-route
Recalculation is re-enabled.
The Cursor is saved as a user POI. Select the
POI group and give a name for the POI, then
select a suitable icon, enter a phone number,
and additional information if you like.
Map locations can be marked with Pins.
Unlike POIs, a Pin has no name and other
details, only a color to let you tell one from
another on the map.