Filter
Top Products
AV8OR User’s Guide Aviation Mode Operation
Messages Function
Pub. No D200803000008 Page 3-68 Revision July 2008.
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
Message Text Cause
Internal GPS failure
When the internal GPS is configured
but no data is being received from it
Nav data Referenced
to True North
When the operator has elected to use a
manually input magnetic variation offset
of ZERO
Nav data Referenced
to User-Defined Mag
Var
When the operator has elected to use a
manually input magnetic variation rather
than AUTO
Unit Configuration
validation errors
found, values set to
default.
Some System setting were out of range
and were set to defaults
User setting
validation errors
found, values set to
default.
Some User settings were out of range
and were set to defaults
Unit Configuration
cleared to Defaults
The System settings NVM could not be
used so default settings were used
instead
All User Settings
cleared to Defaults
The User settings NVM could not be
used so default settings were used
instead
Failed to save user
settings
All attempts to save & back up
User/System/Volatile data failed.
Unit History Data
cleared to Defaults
The Volatile settings NVM could not be
used so default settings were used
instead
Detailed terrain
database is invalid
The fine terrain database could not be
loaded from the card or its checksum
was found to be invalid.
Failed to read FPL
file
A flight plan file could not be read.
The FPL file had
formatting errors
The format of a flight plan file was
incorrect.
Failed to read user
WPT from file
User WPTs could not be read from a
flight plan file.
Failed to read flight
plan from file
a flight plan could not be read from a
flight plan file.
Failed to read FPL A flight plan WPT could not be read