Filter
Top Products
3 - 41
INSP
ADJ
FUSE INSPECTION
FUSE INSPECTION
CAUTION:
Don’t forget to turn off the main switch
when checking or replacing the fuse. Other-
wise, it may cause accidental shortcircuit-
ing.
WARNING
Do not use fuses of a higher amperage rat-
ing than those recommended. Substitu-
tion of a fuse of improper rating can cause
extensive electrical system damage and
possible fire.
Description Amperage Quantity
Main 30A 1
Spare 30A 1
1.Remove:
● Seat
Refer to the “REAR FENDER-Removal”
section.
2.Remove:
● Fuse cover 1
● Fuse
3.Inspect:
● Fuse
**********************************
Inspection steps:
●Connect the Pocket Tester to the fuse and
check it for continuity.
NOTE:
Set the tester selector to “Ω × 1” position.
●If the tester is indicated at ∞. The fuse is
blown, replace it.
**********************************
Pocket tester:
P/N. YU-03112, 90890-03112
3