Filter
Top Products
– 51 –
–+
ELEC
ELECTRIC STARTING SYSTEM
C0NTINUITY
5.Starter relay
● Remove the starter relay from the wire har-
ness.
● Connect the pocket tester (Ω × 1) and the
battery (12 V) to the starter relay terminals.
*
3
4
2
1
R
B
RR
L/W
L/B
CONTINUITY
Battery (+) terminal →
Blue/White terminal 1
Battery (–) terminal →
Blue/Black terminal 2
Tester (+) lead → Red terminal 3
Tester (–) lead → Black terminal 4
● Check the starter relay for continuity.
NO CONTINUITY
Replace the starter relay.
CORRECT
6.Main switch
Refer to “SWITCH INSPECTION”.
INCORRECT
Replace the main switch.
CORRECT
8.Neutral switch
Refer to “SWITCH INSPECTION”.
*
INCORRECT
Replace the neutral switch.
CORRECT
7.Engine stop switch
Refer to “SWITCH INSPECTION”.
INCORRECT
Replace the handlebar switch (left).