Filter
Top Products
7 - 4
CHAS
4.Inspect:
● Brake linings
Glazed parts → Sand with coarse sandpa-
per.
5.Measure:
● Brake lining thickness a
Out of specification → Replace.
NOTE:
Replace the brake shoes as a set (with shoe
springs) if either is found to be worn to the
wear limit.
Brake lining thickness:
4.0 mm (0.16 in)
<Wear limit>:
2.0 mm (0.08 in)
6.Inspect:
● Shoe springs 1
Wear/Damage → Replace.
7.Measure:
● Brake drum inside diameter a
Out of specification → Replace.
Front brake drum inside diame-
ter:
160 mm (4.3 in)
<Wear limit>:
161 mm (4.37 in)
8.Inspect:
● Brake drum inner surface
Oil/Scratches → Remove.
Oil
Use a rag soaked in lacquer
thinner or a solvent.
Scratches
Use a emery cloth (lightly
and evenly polishing).
FRONT WHEELS AND FRONT BRAKE
7