Filter
Top Products
4 - 58
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
NOTE:
Hold the clutch boss 2 by the Rotor Holder
3 to tighten the nut.
6.Bend the lock washer tab 4.
Rotor holder:
P/N. YU-01235, 90890-01235
7.Install:
● Clutch springs 1
● Bearing holder 2
● Bearing 3
● Push rod 4
T
R
.
.
Bolts (clutch spring):
6 Nm (0.6 m • kg, 4.3 ft • lb)
8.Install:
● Drive pinion gear 1
● Nut 2 (drive pinion gear)
WARNING
Always use a new drive pinion gear nut.
9.Tighten:
● Nut 2 (drive pinion gear)
NOTE:
Hold the clutch boss 3 on the secondary
clutch by the Rotor Holder 4 to tighten the
nut.
10.Lock the threads 5 with drift punch.
T
R
.
.
Nut (drive pinion gear):
60 Nm (6.0 m • kg, 43 ft • lb)
Rotor holder:
P/N. YU-01235, 90890-01235
4