Filter
Top Products
3 - 22
INSP
ADJ
ENGINE OIL REPLACEMENT
11.Install:
● Dipstick
12.Warm up the engine for 5 minutes or
more, and stop it.
13.Inspect:
● Oil leaks
● Oil level
14.Inspect:
● Oil flow
**********************************
Inspection steps:
●Slightly loosen the oil gallery plug 1 in
the cylinder head.
●Start the engine and keep it idling until oil
begins to seep from the oil gallery plug. If
no oil comes out after one minutes, stop
the engine immediately so it will not
engine stick.
●Restart the engine after solving the prob-
lem(s), and recheck the oil pressure.
●Tighten the oil gallery plug to specifica-
tion.
**********************************
15.Adjust:
● Rear brake
Refer to “REAR BRAKE LEVER AND
PEDAL ADJUSTMENT” section.
T
R
.
.
Oil gallery plug:
7 Nm (0.7 m • kg, 5.1 ft • lb)
1
3