Filter
Top Products
6 - 21
DRIV
MIDDLE GEAR SERVICE
2.Apply:
● Sealant 1
To the mating surface of both case halves.
3.Install:
● Dowel pins
● Middle gear case cover 2
NOTE:
Before installing the middle gear case cover
onto the crankcase, shift the gear into
“FORWARD”.
4.Tighten:
● Bolts 3 (middle gear case)
5.Tighten:
● Bolts 1 (bearing housing)
NOTE:
When installing the bearing housing onto
the crankcase, make sure that the arrow
sign is facing upwards.
6.Check:
● Middle driven shaft operation
Unsmooth operation → Repair.
MIDDLE GEAR LASH ADJUSTMENT
NOTE:
When measuring backlash, tighten all
securing bolts (middle gear case cover
bearing housing) with specified torque.
1.Attach:
● Gear lash measurement tool 1
● Dial gauge 2
Sealant (Quick Gasket)
P/N. ACC-QUICK-GS-KT
Yamaha bond No. 1215
P/N. 90890-85505
T
R
.
.
Bolts (middle gear case cover):
10 Nm (1.0 m • kg, 7.2 ft • lb)
T
R
.
.
Bolts (bearing housing):
23 Nm (2.3 m • kg, 17 ft • lb)
Gear lash measurement tool:
P/N. YM-01231, 90890-01231
Dial gauge:
P/N. YM-03097, 90890-03097
6