Filter
Top Products
4 - 46
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
6.Install:
● Spring (drive pawl) 1
● Drive pawl 2
● Circlip 3
● Spring 4
● Drive plate 5
● Bolt 6
NOTE:
When installing the spring (drive pawl),
align the spring end 7 with the groove a
on the sheave drum.
7.Turn the sheave drum 3-turns clockwise
to preload the starter spring.
8.Install:
● Starter handle 1
● Cap 2
NOTE:
● Pass the rope through the case hole and
make knot 3 on the rope so that the rope
is not pulled into the case.
● Untying knot 3 after making knot 4.
4