Filter
Top Products
4 - 60
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
15.Install:
● Shift guide #2 1
● Ball holder 2
● Shift guide #1 3
● Spring 4 (clutch release lever)
NOTE:
● The slot 5 in the shift guide #2 must
engage the shift shaft projection 6.
● The slot 7 in the shift guide #1 must
engage the stopper shaft 8.
16.Install:
● Dowel pins 1
● Gasket 2
● Crankcase cover 3
● Clutch cover protector 4
● Oil filter 5
● O-ring 6
● Oil filter cover 7
WARNING
Always use a new gasket.
NOTE:
The clutch release lever 8 engages the shift
guide #1 9.
17.Tighten:
● Screws (crankcase cover)
NOTE:
Tighten the screws in stage, using a criss-
cross pattern.
T
R
.
.
Screws (crankcase cover):
7 Nm (0.7 m • kg, 5.1 ft • lb)
4