Filter
Top Products
7 - 7
CHAS
4.Install:
● Brake shoes
WARNING
Do not apply grease to the brake shoe lin-
ings.
5.Connect:
● Front brake breather hose
● Brake cable (to brake shoe plate)
6.Install:
● Circlip 1
● Spring 2
● Washer (C-type) 3
● Spring 4
● Pin 5
● Adjuster 6
7.Install:
● Brake drum 1
● Spacer collar 2
● Plain washer 3
● Axle nut 4
T
R
.
.
Axle nut:
70 Nm (7.0 m • kg, 50 ft • lb)
8.Install:
● Cotter pin 1
NOTE:
Do not loosen the wheel hub nut after
torque tightening. If the wheel hub nut
groove is not aligned with the cotter pin
hole, align groove with the hole by tighten-
ing up on the wheel hub nut.
WARNING
Always use a new cotter pin.
FRONT WHEELS AND FRONT BRAKE
7