4 - 13
ENG
ENGINE DISASSEMBLY
9.Straighten:
● Lock washer tab 1 (clutch boss)
10.Remove:
● Nut 2 (clutch boss)
NOTE:
Hold the clutch boss 3 by the Rotor Holder
4 to loosen the nut.
11.Remove:
● Lock washer 1
● Clutch boss 2
● Friction plates 3
● Clutch plates 4
● Pressure plate 5
● Washer 6
● Clutch housing 7
OIL PUMP AND SHIFTER
NOTE:
With the engine mounted, the oil pump
assembly can be maintained by removing
the following parts:
● Starter motor
● Crankcase cover (right)
● Primary and secondary clutches
● Crankcase spacer (right)
Rotor holder:
P/N. YU-01235, 90890-01235
1.Remove:
● Crankcase spacer 1 (right)
● Dowel pins 2
● Gasket 3
2.Remove:
● Oil pump assembly 1
● Gasket
4