Filter
Top Products
6 - 30
DRIV
FINAL DRIVE GEAR AND DRIVE SHAFT
3.Remove:
● Bearing retainer (drive shaft - final)
NOTE:
Final-drive-shaft-bearing-retainer has left-
hand threads. Turn retainer clockwise to
loosen it.
NOTE:
When remounting the bearing retainer, use
the Bearing Retainer Wrench 1.
Bearing retainer wrench:
P/N. YM-04050, 90890-04050
4.Remove:
● Drive pinion gear 1
(together with the shim(s) 2 and bearing
3)
Tap lightly on the final drive pinion gear
end with a soft hammer.
CAUTION:
Final drive pinion gear removal should be
performed only if gearing replacement is
necessary. Do not reuse bearings or races
after removal.
5.Remove:
● Oil seal 1
● Roller bearing 2 (ring gear)
Use a suitable press tool 3 and an appro-
priate support for the main housing.
6