Filter
Top Products
MAINTENANCE SPECIFICATIONS
SPEC
2 - 7
Compressed pressure
(installed) IN 162.8 ~ 200.1 N
(16.6 ~ 20.4 kg, 36.6 ~ 45.0 lb)
----
EX 162.8 ~ 200.1 N
(16.6 ~ 20.4 kg, 36.6 ~ 45.0 lb)
----
Tilt limit IN 2.5˚/1.6 mm
(2.5˚/0.06 in)
EX 2.5˚/1.6 mm
(2.5˚/0.06 in)
Direction of winding
(top view) IN Clockwise ----
EX Clockwise ----
Piston:
Piston to cylinder clearance 0.04 ~ 0.06 mm
(0.0016 ~ 0.0024 in)
0.15 mm
(0.0059 in)
Piston size “D” 70.92 ~ 70.97 mm
(2.792 ~ 2.794 in)
----
Measuring point “H” 4.0 mm (0.16 in)
from bottom line of piston skirt
----
Piston off-set 0.5 mm (0.02 in) ----
Piston off-set direction In side ----
Piston pin bore inside diameter 16.002 ~ 16.013 mm
(0.6300 ~ 0.6304 in)
----
Piston pin outside diameter 15.991 ~ 16.000 mm
(0.6296 ~ 0.6299 in)
----
Piston rings:
Top ring:
Type Barrel ----
Dimensions (B
×
T) 1.2
×
2.8 mm (0.047
×
0.110 in) ----
End gap (installed) 0.15 ~ 0.30 mm
(0.006 ~ 0.012 in)
0.4 mm
(0.016 in)
Item Standard Limit
*
H
D
T
B
2