4 - 72
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
REMOUNTING ENGINE
Reverse the “ENGINE REMOVAL” proce-
dure.
Note the following points.
WARNING
Securely support the machine so there is
no danger of it falling over.
1.Install:
● Engine assembly
(from right side)
2.Install:
● Bolt 1 (engine mounting - rear lower)
● Bolt 2 (engine mounting - rear upper)
● Bolt 3 (engine mounting - front)
● Bolts 4 (engine mounting - top)
NOTE:
● All mounting bolts should be installed
from the right of the machine.
● Temporary tighten the nuts and bolt, do
not torque them at this point.
4