Filter
Top Products
3 - 30
INSP
ADJ
●If the oil level is low, add the recom-
mended oil up to the specified level. Refer
to “FINAL DRIVE GEAR OIL REPLACE-
MENT” section.
●Inspect the copper washer for damage. If
damaged, replace it
●Install the copper washer and filler bolt.
NOTE:
● Before installing the filler bolt, do not for-
get to fit the copper washer.
● After installing the filler bolt, inspect the
oil leaks.
**********************************
T
R
.
.
Filler bolt (final drive gear case):
23 Nm (2.3 m • kg, 17 ft • lb)
FINAL DRIVE GEAR OIL REPLACEMENT
1.Place the machine on a level place.
2.Place an oil pan under the final drive gear
case.
3.Remove:
● Final gear case protector
● Filler bolt (final drive gear case)
● Drain plug 1 (gear case)
Drain the final drive gear oil.
4.Inspect:
● Copper washer (filler bolt)
● Copper washer (drain plug)
Damage → Replace.
5.Install:
● Drain plug (final drive gear case)
6.Fill:
● Final drive gear case
CAUTION:
Do not allow foreign material to enter the
final drive gear case.
T
R
.
.
Drain plug (final drive gear case):
23 Nm (2.3 m • kg, 17 ft • lb)
FINAL DRIVE GEAR OIL LEVEL INSPECTION/
FINAL DRIVE GEAR OIL REPLACEMENT
3