Filter
Top Products
4 - 61
ENG
ENGINE ASSEMBLY AND ADJUSTMENT
MIDDLE DRIVEN PINION GEAR
1.Install:
● Dowel pins 1
● Shims 2 (to middle driven shaft)
● Bearing 3
● Middle driven shaft assembly 4
NOTE:
Apply the grease to the O-ring 5.
2.Apply:
● Sealant 1
(to matching surface of middle shaft case
cover)
Sealant (Quick Gasket
):
P/N. ACC-QUICK-GS-KT
Yamaha Bond No. 1215:
P/N. 90890-85505
3.Install:
● Case cover 1 (middle driven shaft)
NOTE:
Before installing the middle gear case cover
onto the crankcase, shift the gear into
“FORWARD”.
T
R
.
.
Bolt (middle shaft case cover):
10 Nm (1.0 m • kg, 7.2 ft • lb)
4.Tighten:
● Bolts 1 (bearing housing)
NOTE:
When installing the bearing housing onto
the crankcase, make sure that the arrow
sign is facing upwards.
T
R
.
.
Bolt (bearing housing):
23 Nm (2.3 m • kg, 17 ft • lb)
4