Filter
Top Products
8 - 34
–+
ELEC
SIGNAL SYSTEM
3.If the brake light fails to come on:
(for New Hampshire and Maine)
CONTINUITY
1.Bulb and bulb socket
● Check the bulb and bulb socket for conti-
nuity.
NO CONTINUITY
Replace the bulb and/or bulb socket.
CONTINUITY
2.Brake switch
Refer to “SWITCH INSPECTION”.
NO CONDITION
Replace the brake switches.
CONTINUITY
3.Lights switch
Refer to “SWITCH INSPECTION”.
NO CONDITION
Replace the lights switch.
4.Voltage
● Connect the pocket tester (DC 20 V) to
the bulb socket leads.
Tester (+) lead → Blue terminal 1
Tester (–) lead → Yellow terminal 2
1
2
L L
Y Y
B B
MEETS
SPECIFICATION
● Turn the main switch to “ON”.
● Check the voltage (12 V).
This circuit is not faulty.
OUT OF SPECIFICATION
The wiring circuit from the main switch to
the bulb socket connector is faulty, repair
it.
8