6 - 29
DRIV
FINAL DRIVE GEAR AND DRIVE SHAFT
NOTE:
● When the final gear case until is removed
from the swingarm, the drive shaft 3 may
fall off.
● Be careful not to lose these parts.
DISASSEMBLY
1.Remove:
● Bolts 1 (8 mm)
● Bolts 2 (10 mm)
NOTE:
Working in a crisscross pattern, loosen bolt
1/4 turn each. Remove them after all loos-
ened.
2.Remove:
● Bearing housing 1
● Shim(s) 2
● Ring gear 3
● Thrust washer 4
6