Filter
Top Products
3 - 8
INSP
ADJ
FUEL TANK
6.Turn the fuel cock lever to “OFF” position.
7.Disconnect:
● Fuel hose 1
NOTE:
Place a rug on the engine to absorb a spilt
fuel.
WARNING
● Gasoline is highly flammable.
● Avoid spilling fuel on the hot engine.
8.Remove:
● Bolt 1 (with washer and collar)
9.Disconnect:
● Air duct 2 (with hoses)
● Grommet 3 (with hoses)
10.Remove:
● Fuel tank 4
Installation
Reverse the “Removal” procedures.
Note the following points.
1.Install:
● Fuel tank 1
2.Connect:
● Air duct 2 (with hoses)
● Grommet 3 (with hoses)
NOTE:
When installing the grommet, the projec-
tion 4 should be positioned forward.
3.Install:
● Bolt 1 (with washer and collar)
T
R
.
.
Bolt (fuel tank and frame):
10 Nm (1.0 m • kg, 7.2 ft • lb)
3