Mitsubishi Electronics MDAX520-0.5K TO 3.5K Automobile Accessories User Manual


 
1
Please read here first
Thank you for choosing the Mitsubishi Magnetic Motor Drive Unit. This instruction manual gives
handling information and precautions for use of the drive unit.
Incorrect handling of the equipment may cause an unexpected fault. To optimize the unit capability,
please read this manual carefully before using the equipment.
Please refer to the Mitsubishi Magnetic Motor Instruction Manual for the Mitsubishi Magnetic Motor.
General precautions
Please forward this instruction manual to the end user.
Many of the diagrams and drawings in this instruction manual show the drive unit without a
cover, or partially open. Never run the drive unit in this manner. Always replace the cover
and follow this instruction manual when operating the drive unit.
After reading this manual, store it carefully in a place where it is easily accessible for the
operator.
This instruction manual is subject to modifications for specification changes and manual
improvements. After such modifications have been made, the instruction manual will be
published as a revised version with a new number located on the bottom left of the back
cover.
For safe operation of this product
This product has not been designed or manufactured for use in or with a device or system
which will be used under circumstances where life may be endangered.
Consult with Mitsubishi if you are planning to use this product for special purposes, e.g.
equipment or systems designed for manned transport vehicles, medical purposes,
aerospace, nuclear power, electric power or undersea junctions.
This product has been manufactured under strict quality control. However, when installing
the product where serious accidents or losses could occur if the product fails, install
appropriate safety devices in the system.
Do not use this product with any load other than the specified motor.
You cannot use a single drive unit with two or more motors.