Filter
Top Products
8 PARAMETER FUNCTIONS
8-63
8
8.7.4 Detection of output current
Initial value
Pr. 150 "output current detection level" 150
Pr. 151 "output current detection time" 0
Pr. Setting Range Unit
150 0.0 to 200.0 %
151 0.0 to 10.0 s
If the motor current remains higher than the Pr. 150 setting for longer than the time set in Pr. 151,
the terminal where the assigned Y12 signal turns "ON". The Pr. 150 value is based on the rated
motor current.
Use any of Pr. 190 to Pr. 195 [Section 8.7.2] to assign the terminal used for Y12 signal output.
Once turned on, the Y12 signal remains on for at least 100ms.
Pr. 151
Pr. 150
ON OFF
Time
At least 100ms
Y12 signal
Output current