Open as PDF
ENGINE BLOCK HEATER — IF EQUIPPED
The engine block heater warms engine coolant and
permits quicker starts in cold weather. Connect the cord
to a standard 110-115 volt AC electrical outlet with a
grounded, three-wire extension cord.
The engine block heater cord is routed under the hood on
the driver side of the vehicle. It has a removable cap that
is located on the driver side of the Integrated Power
Remember to disconnect the cord before driving.
Damage to the 110-115 volt electrical cord could
Damage to the transmission may occur if the follow-
ing precautions are not observed:
Shift into PARK only after the vehicle has come to
a complete stop.
Shift into or out of REVERSE only after the
vehicle has come to a complete stop and the
engine is at idle speed.
Do not shift from REVERSE, PARK, or NEUTRAL
into any forward gear when the engine is above
Before shifting into any gear, make sure your foot
is firmly on the brake pedal.
STARTING AND OPERATING 199