Filter
Top Products
3 - 38
CHK
ADJ
CHECKING THE FRONT BRAKE FLUID
LEVEL
1.Place the machine on a level surface.
N
OTE:
When checking the front brake fluid level,
make sure that the top of the master cylinder
top is horizontal.
2.Check:
●
Brake fluid level
Fluid level is under “LOWER” level line 1 →
Fill up.
CAUTION:
Brake fluid may erode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
WARNING
●
Use only the designed quality brake fluid:
otherwise, the rubber seals may
deteriorate, causing leakage and poor
brake performance.
●
Refill with the same type of brake fluid;
mixing fluids may result in a harmful
chemical reaction and lead to poor
performance.
●
Be careful that water does not enter the
master cylinder when refilling. Water will
significantly lower the boiling point of the
fluid and may result in a vapor lock.
Recommended brake fluid:
DOT 4
CHECKING THE FRONT BRAKE FLUID LEVEL