Yamaha 5TE-F8197-10 Camper User Manual


 
4 - 78
ENG
MIDDLE GEAR
REMOVING THE MIDDLE DRIVE SHAFT
1.Straighten:
Punched portion of the nut (middle drive
pinion gear)
2.Loosen:
Nut (middle drive pinion gear) 1
N
OTE:
Secure the middle drive shaft in the vise with a
clean rag.
3.Remove:
Nut (middle drive pinion gear)
Middle drive pinion gear
Shim(s)
REMOVING THE MIDDLE DRIVEN SHAFT
1.Remove:
Universal joints
*****************************************************
Removal steps:
Remove the circlips 1.
Place the U-joint in a press.
With a suitable diameter pipe 2 beneath the
yoke 3, press the bearing 4 into the pipe as
shown.
N
OTE:
It may be necessary to lightly tap the yoke with
a punch.
Repeat the steps for the opposite bearing.
Remove the yoke.
N
OTE:
It may be necessary to lightly tap the yoke with
a punch.
*****************************************************