Filter
Top Products
9 - 16
– +
ELEC
ELECTRIC STARTING SYSTEM
EB803020
TROUBLESHOOTING
Procedure
Check:
1.Fuse (main, ignition)
2.Battery
3.Starter motor
4.Starter relay
5.Main switch
6.Engine stop switch
7.Start switch
IF THE STARTER MOTOR FAILS TO OPERATE:
8. Wiring connections (the entire starting
system)
N
OTE:
●
Remove the following part(s) before
troubleshooting:
1)Seat
2)Fuel tank side panels
3)Fuel tank
4)Air cleaner case
5)Front carrier
6)Front fender panel
●
Use the following special tool(s) for
troubleshooting.
Pocket tester:
P/N. YU-03112-C, 90890-03112
EB802011
CONTINUITY
1.Fuses (main, ignition)
Refer to “CHECKING THE SWITCHES”.
NO CONTINUITY
Replace the fuse.
EB802012
CORRECT
2.Battery
●
Check the battery condition.
Refer to “CHECKING THE BATTERY” in
CHAPTER 3.
Open-circuit voltage:
12.8 V or more at 20 °C (68 °F)
*
INCORRECT
●
Clean the battery terminals.
●
Recharge or replace the battery.