Filter
Top Products
8 - 33
CHAS
STEERING SYSTEM
REMOVING THE BEARING RETAINER
1.Remove:
●
Bearing retainer (steering stem)
Damper rod holder (30 mm):
P/N. YM-01327, 90890-01327
CHECKING THE STEERING STEM
1.Check:
●
Steering stem
Bends → Replace.
WARNING
Do not attempt to straighten a bent stem;
this may dangerously weaken the stem.
2.Check:
●
Oil seals 1
●
Steering stem bushings 2
Wear/damage → Replace.
INSTALLING THE BEARING RETAINER
1.Install:
●
Bearing retainer (steering stem)
INSTALLING THE CABLE GUIDE
1.Install
●
Cable guide
●
Lock washer
●
Bolts
2.Bend the lock washer tabs along a flat side
of the bolts.
N
OTE:
Pass the cables and hoses through the cable
guide. Refer to “CABLE ROUTING” in
CHAPTER 2.
Damper rod holder:
P/N. YM-01327, 90890-01327
T
R
.
.
40 Nm (4.0 m • kg, 29 ft • lb)
New
T
R
.
.
23 Nm (2.3 m • kg, 17 ft • lb)