Filter
Top Products
3 - 42
CHK
ADJ
BLEEDING THE HYDRAULIC BRAKE SYSTEM/
ADJUSTING THE SELECT LEVER CONTROL CABLE AND SHIFT ROD
WARNING
Check the operation of the brake after
bleeding the brake system.
*****************************************************
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
1
NEUTRAL
2
FORWARD
3
REVERSE
4
Control cable
5
Select lever shift rod
WARNING
Before moving the select lever, bring the
machine to a complete stop and return the
throttle lever to its closed position.
Otherwise the transmission may be
damaged.
1.Adjust:
●
Rear brake pedal free play
Refer to “ADJUSTING THE REAR BRAKE”.
2.Adjust:
●
Select lever control cable
●
Select lever shift rod
*****************************************************
Adjustment steps:
Control cable:
●
Remove the rear brake light switch cover
1
.
●
Make sure the select lever is in NEUTRAL.
●
Adjust the control cable so there is zero free
play in the cable. When the adjustment is
correct, slack in the return spring
2
will be
taken up.
N
OTE:
In some cases it will be necessary to further
adjust the cable with the locknuts
3
arrangement that holds the cable to its mount.